jp gear JP Hobby Multifunctional Electric Landing Gear Controller

jp gear JP Hobby Multifunctional Electric Landing Gear ControllerJP Hobby Multifunctional Electric Landing Gear Controller The V1 Sequencer keeps the doors in a open position when the retracts are in the down position. This electronic switch is used to control the sequence of electric retract from your transmitter gear channel switch. Note: Version 2 closes the doors when the gear is down while version 1 keep the doors open Warning: Servos for controlling the gear doors must be H. V. (High Voltage) type.

JP Hobby Multifunctional Electric Landing Gear Controller 

The V1 Sequencer keeps the doors in a open position when the retracts are in the down position.

This electronic switch is used to control the sequence of electric retract from your transmitter gear channel switch.

Note: Version 2 closes the doors when the gear is down while version 1 keep the doors open

Warning: Servos for controlling the gear doors must be H.V. (High Voltage) type.

Description

This new JP Hobby electronic module is used to control the animation sequences of retractable landing gear as well as doors.

It can also be used with other enclosures equipped with integrated end of limit switches.

• The functions of the JP Hobby module are multiple:
• Automatic detection of the supply voltage
• Adjusting the supply voltage of the servos actuating the gear doors
• Adjusting the direction of rotation of the servos actuating the gear doors
• Mode selection:

       - 1: Opened gear doors when the landing gear is out        
       - 2: Closed gear doors when the landing gear is out

This controller can be used for either monocycle (1 channel), bicycles (2 channels) or tricycles (3 channels)gears systems from JP Hooby.

How to use it

To change the direction of the Door Servo:

• Long press the "MODE" key
• A or B will flash.
• press + or - to change the direction.

To change the -100% Servo stroke:

• Long press the "MODE" key
• A or B will flash.
• Press "MODE" once
• A and B will flash.
• press + and - to increase or decrease stroke

To change Servo stroke +100%:

• Long press the "MODE" key
• A or B will flash.
• Press twice on "MODE"
• C and D will flash.
• press + and - to increase or decrease stroke

To change the "MODE":

• Long press the "MODE" key
• A or B will flash.
• Press "MODE" 3 times
• C or D will flash.
• press + for "MODE 1" or - "MODE 2"

Specifications

• Input voltage: 7.4V to 8.4V (2 cells lipo)
• Weight: 35 gr
• Size: 16x42x63 MM